GEt Quote

Low Temperature Expandable Graphite

As low as $0.00 $0.00
In stock
SKU# 149

Product Detail

CAS No.: 7782-42-5

Products No.

Expansion

Start

Temperature

(EST‚ °C)

pH Mesh

Packing Density

(mg/cm3)

Expansion Volume

(EV‚ ml/g)

Property

CXG00122

(EG-110-230)

(Discontinued)

110 7.0 80 0.6 230

Super-low Expansion

Start Temperature

EG-150-230

(Discontinued)

150 7.0 80 0.6 230

Please also check our Expandable Graphite.

SKU

Particle Size
(um)

Purity (%)

Expansion Start Temperature

(EST‚ °C)

Expansion Volume

(EV‚ ml/g)

Highlights and Application

CXG22022

80%<75um

≥92%

190℃±10℃

≥20 ml/g

Application: Coatings, Paints, Adhesive, and Textile, which requires finer particle size.

CXG21122

80%<150 um

≥94%

180℃±10℃

≥35 ml/g

Application: Coatings, Paints, Adhesive, and Textile, which requires finer particle size, in case CXG22022 cannot satisfy the flame retardance requirements.

CXG21222

80%<150 um

≥94%

180℃±10℃

≥95 ml/g

Application: Coatings, Paints, Adhesive, and Textile, which requires finer particle size, in case CXG21122 cannot satisfy the flame retardance requirements.

CXG52322

80%>150 um

≥95.0%

180℃±10℃

≥200 ml/g

Application: Spray foams, which require fine particle size.

CXG8B122

80%>180 um

≥95.0%

180℃±10℃

≥230 ml/g

Standard product with fine particle size. Application in PU foam, EPS foam, Sealing Strip, etc.

CXG5B122

80%>300 um

≥95.0%

180℃±10℃

≥250 ml/g

Standard product for all main applications, like PU foam, Coating, Rubber, Adhesive, Construction Materials, etc.

CXG5B022

80%>300 um

≥99.0%

180℃±10℃

≥250 ml/g

Same expansion, but higher purity than CXG5B122

CXG5C022

80%>300 um

≥98.0%

170℃±10℃

≥350 ml/g

High purity, very high free expansion and expansion strength. Application: for all main applications which requires better flame-retardant effects than CXG5B122.

SKU

Mesh

Purity

(%)

Expansion Start Temperature

(EST,°C)

Expansion Volume

(EV, ml/g)

Highlights and Application
*CXGAA222

150

≥92% 175℃ ≥150 ml/g Mainly used in fabric coatings, fire-resistant adhesives and EPS and XPS flame retardants
*CXG00522

80

≥95% 250℃ ≥180 ml/g

With application where extruder used

*CXG00622

50

≥95% 300℃ ≥170 ml/g Highest Expansion Start Temperature

*These three products will be discontinued after sold out. 

Disclaimer: ACS Material LLC believes that the information on our website is accurate and represents the best and most current information available to us. ACS Material makes no representations or warranties either express or implied, regarding the suitability of the material for any purpose or the accuracy of the information listed here. Accordingly, ACS Material will not be responsible for damages resulting from use of or reliance upon this information.

Research Citations of ACS Material Products